The PDF form is a fillable form, just type in your information and check the list. Fax or return the form to BIZMATRIX 07 32646539 or email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 Allow for the certification to be completed within 7 days , we require a minimum of 3 days notice. Please make certain the gas and power is available for the on site testing of the appliance for certification.

Queensland Gas Association Type A Commercial  Domestic equipment individual gas certification.

Did you know if a gas appliance does not have a Gas Appoval like the SAI GlOBAL Gas Water mark or the AGA approval the gas fitter must not connect the appliance:

The QGA individual gas appliance certifcation scheme is a system that is an individual safety certification test of the individual appliance:

What needs to be approved before a gas fitter may legally connect the appliance

• All Type A gas appliances!
• All Type A appliances with expired approvals that are repaired or relocated.
• All new appliances not Australian approved that is a Type A gas appliance:
• All gas appliances beofre the items are put for sale or auction!
• All gas hoses, gas bottles and gas regulators must be approved prior to sale!

We offer a gas certification system for all commercial or domestic Type A gas equipment that is not either AGA approved or SAI Global Gas safety certified:

This service is available for new or secondhand equipment: Caravans, Motor homes, Marine , domestic gas appliances and commercial appliances.

All gas equipment must have a current approval before the gas installer may connect to the gas supply.

Where equipment is to be relocated, this equipment must not be connected unless the equipment holds a current certifcation or is QGA certified/ 2 nd tier approved and badged.

For more information email us through the Bizmatrix contact area or phone  Darrel  at + 61 (0) 411 884901   This e-mail address is being protected from spambots. You need JavaScript enabled to view it '; document.write( '' ); document.write( addy_text95372 ); document.write( '<\/a>' ); //--> This e-mail address is being protected from spambots. You need JavaScript enabled to view it for more information http://www.qga.org.au

Example:

You have imported some new gas equipment 6 burner range and gas fryer, the equipment has no gas approvals: The equipment needs to be either Type tested through the Australian Gas Association or SAI Global, this process will take approximately 3-6 months and will be a minimum cost of $2,000 per5 appliance not including the information required to achieve the approval. If you were to import more than 10-15 items, you would proceed through this process.

The next choice is 2nd Tier or safety approvals where we test each appliance and the cost is far less per item. As a QGA certifier we can arrange for this process easily and efficently with peace of mind. The process is normally completed within 2-3 days after application:

A gas fitter may check the QGA website to confirm if an appliance has been QGA certified This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Download the application and check list CHECKLIST APPLICATION